Grade
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.
Application
Fiber (Carpet, Textiles, Upholstery, etc. )
Film (Shopping bags, casting film, multilayer film, etc. )
Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
Extrusion Molding (Sheet, Pipe, Wire & Cable, etc. )
Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc. )
Test item | Unit | Index |
Tensile strength | MPa | >=13.5 |
Rupture elongation | % | >=350 |
Impact brittle temperature | | -76 |
Impact brittle performance | Failure rate | <=15/30 |
Heating aging temperature | | 135+-2 |
Duration | H | 168 |
Tensile strength change rate | % | +-20 |
Rupture elongation change rate | % | +-20 |
Hot drawing | % | <=80 |
Keep permanent deformation after cooling | % | <=5 |
Gel contents | % | >=80 |
Dielectric loss factor | | <=1X10-3 |
Relative dielectric constant | | <=2.35 |
Volume resistivity | O.m | >=1X1014 |
Dielectric strength | MV/m | >=25 |
2. Property:
1. With high transparency, no discoloration, good self-adhesive, good retraction ratio, good tensile properties, 1 meter can be on 3-5 meters use.
2. Non-toxic, tear-resistant, anti-puncture, hot temperature endurable;
3. Water-proof, moisture-proof, dust-proof, anti-corrosion
4. This is Pallet Wrap Film(LLDPE Stretch Film) produced by three layer common extruding machine, it provide excellent protection for the surface of packed products. It can reduce packaging cost, its economical, labor saving, efficiency increasing. Its easy to use and remove, suitable for palletized packaging of products and transportation operation.
3. Application:
1. Pallet packaging, carton packaging, wrapping bulk goods, daily necessities packaging;
2. Applied to various fields, such as Electronics, buliding materials, chemicals, materials, automobile components, wire&cable, paper, bottle, can, hardware and electrical materials etc.